The DCM 010 is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.
The DCM 010 is used to control DC powered devices with high capacities in control and switch cabinets.
Features
Technical Data
Contact Type: NO – normally open (MOSFET)
Service Life: > 100,000 cycles
Operating Voltage: DC 20 to 56 V
Control Contact – Signal Current:
3 mA at DC 20 V / 4.5 mA at DC 24 V
14 mA at DC 48 V / 17 mA at DC 56 V
Connection:
6-pole terminal:
stranded wire* AWG 16 (1.5 mm²); max. AWG 12 (2.5 mm²)
Housing: plastic, UL 94V-0, grey (bicolor)
Mounting: clip for 35 mm DIN rail, EN 60715
Mounting Position: vertical
Dimensions: 3.7 x 2.1 x 1.7” (93 x 53 x 44 mm)
Weight: approx. 2.3 oz. (65 g)
Operating/Storage Humidity: max. 90 % RH (non-condensing)
Protection Type: IP20
Approvals: UL File No. E164102 / VDE / EAC
Max. Switching Capacity (Relay Output): DC 15 A
Operating Temperature: -40 °F to +104 °F (-30 °C to +40 °C)
Max. Switching Capacity (Relay Output): DC 13 A
Operating Temperature: -22 °F to +122 °F (-30 °C to +50 °C)
Max. Switching Capacity (Relay Output): DC 11 A
Operating Temperature: -22 °F to +140 °F (-30 °C to +60 °C)
"*" indicates required fields
