The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an optional integrated thermostat for temperature control. The CS 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CS 030 fan heater is recommended.
The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.
Features
Technical Data
Heating element: PTC resistor – temperature limiting
Overheat Protection: built-in temperature limiter
Axial fan, ball bearing: service life 50,000 h at +77 °F (25 °C)
Air flow, free blowing: 94 cfm (160 m³/h)
Connection: 2-pole terminal AWG 16 max. (1.5 mm²) with strain relief, clamping torque 0.8 Nm max
Housing: plastic, UL 94V-0, black
Mounting: clip for 35 mm DIN rail, EN 60715 or M6 screws (not included)
Mounting position: vertical airflow (air outlet up)
Operating / Storage temperature: -49 to +158 °F (-45 to +70 °C)
Operating / Storage humidity: max. 90% RH (non-condensing)
Dimensions: 4.7” x 6.6” x 7.2” (120 x 168 x 182 mm)
Weight: approx. 2.6 lbs. (1.2 kg)
Protection class / type: IP20 / II (double insulated)
Heating capacity¹: 1,200 W
¹at 68 °F (20 °C) ambient temperature
Operating voltage: 230 VAC 50/60 Hz
Max. current (inrush): 13.0 A
Recommended pre-fuse T (time-delay): 10.0 A
Setting range²: 0 to 60 °C
Approvals: UL File No. E150057³ / VDE / EAC
²Switching difference 12.6°F ± 7°F tolerance (7K ± 4K)
³according to UL 508A, NITW File on request
Operating voltage: 230 VAC 50/60 Hz
Max. current (inrush): 13.0 A
Recommended pre-fuse T (time-delay): 10.0 A
Setting range²: none (no integrated controls)
Approvals: UL File No. E150057³ / VDE / EAC
²Switching difference 12.6°F ± 7°F tolerance (7K ± 4K)
³according to UL 508A, NITW File on request
Operating voltage: 120 VAC 50/60 Hz
Max. current (inrush): 16.0 A
Recommended pre-fuse T (time-delay): 16.0 A
Setting range²: 32 to 140 °F
Approvals: UL File No. E150057³ / EAC
²Switching difference 12.6°F ± 7°F tolerance (7K ± 4K)
³according to UL 508A, NITW File on request
Operating voltage: 120 VAC 50/60 Hz
Max. current (inrush): 16.0 A
Recommended pre-fuse T (time-delay): 16.0 A
Setting range²: none (no integrated controls)
Approvals: UL File No. E150057³ / EAC
²Switching difference 12.6°F ± 7°F tolerance (7K ± 4K)
³according to UL 508A, NITW File on request
"*" indicates required fields
